6.35 .38 .34 8.6 .128 3.25 .069 1.75 .015 6.1 .24 .204 5.18 .250 .152 3.86 catalog p/n: 452-900-0630j notes: unless otherwise specified 1. for general series specifications, see sd45-0000. 2. material specifications: all metal parts: copper alloy insulator: teflon per astm d1710 3. finish specifications: center contact: .000030 min. gold per astm b4888 over .000100 min. copper per astm b734 body: .000015 min. gold per astm b4888 over .000100 min. copper per astm b734 all other metal parts: .000100 min. tin per astm b545 over copper flash 4. electric al specifications: impedance: 50 ohms frequency range: dc to 3ghz non-magnetic 5. for use with rg-316 cable or equivalent. 6. for cabeling procedures use cap 9-09 with trimming dimensions shown. 7. crimp ferrule using .128 hex. die. g a of mcx right angle plug rev SD452-900-0630J sht 1 angles: 2 scale: 4:1 w ronics t lec wallingford, connecticut 06492 dcam 62 barnes industrial road north 09/11/07 cwb date appd by ecr-er4065 description g rev 03/12/03 jem date approved 03/12/03 kjt date approved 03/13/03 sd date approved 09/11/07 cwb date drawn revised per drawing customer winchester electronics corporation e er t inches per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx 1 cable triming dimensions 5.59 .220 .180 4.57 .090 2.29
|